STUMPEX
AUGER STUMP GRINDER ATTACHMENT
- Fraction of work time compared to conventional stumpers
- No carbide tools to replace
- Low maintenance (greasing & sharpening only)
- Low RPM auger bit (7-16 RPM) leads to easy clean-up and has no high speed flying debris for safer work zone
- Mount on skid steers with 20-42 GPM / 2,500 to 4,000 psi
- Mount on excavators with 12-20 ton rating and back hoes
- Photos (9)
- Videos (7)
- Features
- Specs
- Literature
STUMPEX ATTACHMENT OVERVIEW
Be sure no one is within 15 feet of the working area to ensure safety. Always survey your working area for obstructions and call before you dig to avoid utilities.
Always properly maintain your Sumpex by inspection daily and making sure your blades are properly sharpened. Stumpex blades should maintain a 30 degree angle to work efficiently. Remember to always use your Fecon-provided sharpening gauge.
- Any Species of Wood
- Bores 20” into Ground while Cutting Feeder Roots
- Durable AR500 Steel Blades make the Stumper Tough, Even in Rocky Conditions
- Safer than Conventional Stumpers due to Slow Rotation Auger Bit Action
STUMPEX ATTACHMENT PRODUCT SPECIFICATIONS
STUMPEX
| Weight | 1368 lbs |
| Hydraulic Flow | 20 – 42 gpm |
| Hydraulic Pressure | 2500 – 4000 psi |
